4-Bay SATA Hardware RAID Enclosure, RAID 0, RAID 5, RAID 10

Protect your precious data and digital content!  Built in hardware RAID allows safeguarding your precious data and digital content, keeping it safe and readily available anytime!  And since the control is built into the enclosure it requires no computer system overhead!

• RAID 0 (Striping) — allows the enclosure to performance stripe the drives, to provide maximum throughput to the direct attached PC/Server.
• RAID 5 (Striping with Parity) — provides the perfect balance between very high performance and data integrity.
• RAID 10 (Mirrored Stripe) — provides 100% data redundancy plus offers increased performance by striping across 2 disks.
• Concatenation (Spanning)  — presents all drives as a single large volume.

eSATA, FireWire 800, FireWire 400 and USB 2.0 connections means you can connect it to just about any computer!		LCD control panel allows easy setup, control and monitoring directly from the front of the unit

 
Features:

• 4 bay tray-less design - requires no caddies or trays - fast and easy hard drive swapping
• High performance Universal Interfaces -  compatible with practically any current system
  • eSATA
  • FireWire 800
  • FireWire 400
  • USB 2.0
• Oxford Semi OXUFS936QE chip set  - Integrated hardware RAID controller supporting:
  • Disk striping (RAID 0) for maximum performance
  • Disk striping with distributed parity (RAID 5)
  • Disk striping with dedicated parity (RAID 3)
  • Disk striping with mirroring (RAID 10)
  • Disk spanning for large capacity single volume
  • Support for hot spare disk
• Compatible with all 3.5" SATA hard drives
• Hardware RAID rebuild engine (up to HDD transfer rate)
• Sustained data transfer rates in excess of 240MB/s (limited only by HDD or interface transfer rates)
• Integrated hardware 128-bit AES encryption/decryption engine - supports multiple authentication methods
• Flexible RAID control through LCD panel
• Control software (Web GUI) also included
• Compatible with Apple Time Machine
• RoHS Compliant  

What's Included:

• 4-Bay SATA hardware RAID Enclosure
• eSATA cable
• FireWire 800 9-pin/9-pin cable
• FireWire 400 6-pin/6-pin cable
• USB 2.0 cable 
• Internal SATA to eSATA port adapter bracket
• FireWire 400 PCI card
• AC power cable
• Set of bay lock keys 
• CD with manual, drivers and RAID utility

Specifications:

• Connectors:
  • eSATA, FireWire 800, FireWire 400 and USB 2.0
• Compatibility:
  • Compatible with all 3.5" SATA I (Serial ATA 1.5Gb/s) and SATA II (Serial ATA 3Gb/s) Hard Drives
• Drive Mounting:
  • Tray-less drive bays require no screws, drives just slide in and out of the enclosure, supports up to 50,000 insertion/removal cycles
• Performance: 
  • Up to 240MB/s
• Power Supply:
  • 115/230 VAC, 50-60 Hz 80 watt 
• Dimensions:
  • 19.0 in. x 5.2 in. x 18.0 in.
• Weight:
  • 25 Lbs
• Warranty:
  • One Year Manufacturers Warranty

System Requirements:

• An available eSATA, FireWire 800, FireWire 400 or USB 2.0 port
• Windows XP, Windows Vista
• Mac OS 10.4 or higher