|
The Adaptec Serial ATA II RAID 1420SA card is a four-port
PCI-X/133 MHz host controller featuring Adaptec HostRAID - an integrated RAID technology that maximizes system performance and uptime.
The Adaptec 1420SA supports up to four Serial ATA drives and offers RAID levels 0 (striping), 1 (mirroring),
10 (1+0 striped mirrors) and JBOD (individual drive).
48-bit logical block addressing (LBA) support enables use of
even the largest SATA hard drives.
The Adaptec 1420SA allows you to tune your system performance and data protection.
On a personal computer use RAID 0 (striping) for enhancing the performance of applications such as audio/video streaming and gaming.
In a small office or home office environment, use RAID 1 (mirroring) to write
your data to multiple drives, so you always have a backup of your precious data
and operating system. Four-drive connectivity allows the use of up to two striping or mirroring RAID arrays at the same time.
The Adaptec 1420SA provides improved performance over comparable SATA RAID controllers by offering a PCI-X/133 MHz host interface with bandwidth up to 1056 MB/s, which is twice as much as a common 64bit PCI interface. Plus, its four
3Gb/s SATA II ports can deliver drive throughputs of up to 300 MB/s each!
|
|
Features:
|
- Support up to 4 SATA drives
- Backwards compatible with 1.5Gb/s (SATA I) drives
- PCI-X/133MHz host interface (supports PCI 32/64bit as well)
- RAID 0, 1, 10 and JBOD
- SATA II disk hot plug
- Low-profile form factor (includes both full-size and low-profile brackets)
- Flash BIOS allows easy upgrades
- Background initialization
- Supports bootable arrays
- 48-bit LBA supports large capacity drives
- S.M.A.R.T. and SNMP support
- RoHS compliant
|
|
|
|
What's In the box:
|
- Adaptec Serial ATA II RAID 1420SA card
- Four 1 meter Serial ATA cables
- Standard full-size bracket
- Low-profile bracket also included
- Quick Install Guide
- Bootable CD ROM with Adaptec Storage Manager™ RAID Management Software, device drivers and documentation
|
|
Adaptec 1420SA SATA II RAID Controller Specifications
|
- 4 internal 7-pin SATA ports
- PCI-X /133 MHz (compatible with PCI 32/64 bit)
- Warranty: Adaptec 3 Year Warranty
|
|
System Requirements
|
- Pentium III 700Mhz or faster desktop computer
- 128 MB RAM or more
- Available PCI-X slot or 32/64 bit PCI slot (PCI-X slot required for maximum performance)
- Operating Systems:
- Windows 2000
- Windows XP
- Windows Server 2003
- Red Hat Linux Advanced Server 2.1
- Red Hat Linux Enterprise Server 3.0
- SuSE Linux Professional 9.1
- SuSE Linux Enterprise Server 9
- United Linux 1.0
- Novell NetWare 6.5
|
NEW!
