SATA, USB and IDE PCI Controller

Needing an upgrade but don’t have a lot of room to spare? This SATA, eSATA, USB 2.0 and IDE Combo PCI card gives you an amazing number of connection options while using only one PCI slot.  Adding this many ports would normally take two or three PCI slots, but with this card you get an internal SATA port, an external eSATA port, four external USB 2.0 ports, and an IDE drive connection, all on the same card!

Perfect for any system where space is tight but high performance is still needed, this combination card puts the popular interfaces right at your fingertips. 

• VIA VT6421A SATA chipset  & VIA VT6214L USB 2.0 chipset
• Supports 32-bit PCI Bus Mastering Mode at 33mhz
• Compliant with PCI specification version 2.2
• Plug and play is fully supported on SATA and USB interfaces

What's In the box:

• SATA, eSATA, USB 2.0, IDE Combo PCI card
• Driver CD
• User manual

SATA, USB and IDE PCI Controller Specifications:

• SATA:
  • 1 internal SATA port
  • 1 external eSATA port
  • Data Transfer Rate: Up to 150 Mbytes/sec
  • Standards: SATA 1.0 standard
  • Supports software RAID 0, RAID 1 and JBOD
• IDE:
  • 1 internal IDC 40 connector
  • Data Transfer Rate: Up to 133 MBytes/sec
  • Supports Mode 6 Ultra DMA transfers
  • Supports 48-bit LBA for hard drives over 137GB
  • Compliant with ATA/ATAPI-6 specification
  • Supports two IDE drives
• USB 2.0:
  • 4 external USB 2.0 ports
  • Data Transfer Rate:
    • USB 2.0: Up to 480 Mbits/sec
    • USB 1.1: Up to 12 Mbits/sec
  • Standards:
    • USB 2.0, OHCI USB Rev 1.0a
    • EHCI USB Rev 0.95

System Requirements:

• Pentium II 400 MHz or faster desktop computer with available PCI slot
• Windows 98SE, ME, 2000, Sever 2003, XP, XP 64-bit, Vista