|
|
Based on the Silicon Image SiI 3124 3Gb/s chipset
supports up to 4 SATA drives! You get two external eSATA and two internal RAID-ready SATA ports for your high performance SATA hard drives. Whether you need Striping (RAID 0), Mirroring (RAID 1),
Mirrored Striping (RAID 1+0) or Parity Striping (RAID 5),
this card has you covered. Also functions as non-RAID controller for up to 4 individual
drives!
|
|
Features:
|
- Silicon Image SiI 3124 chipset supports up to 4 SATA drives
- Two external eSATA and two internal SATA ports
- Compliant with Serial ATA II specification (the extension of SATA 1.0a Revision 1.1)
- Compliant with Gen2i, Gen2m SATA II Electrical specification Revision 1.0
- Backward compatible with SATA 1.0
- PCI-X 64-bit, 133 MHz host interface
- Integrated PCI DMA engines
- Metal shielded Serial ATA connectors for extra durability
- Supports SATA data rates up to 3Gb/sec (300 MB/s)
- Supports Native Command Queue (NCQ), Port Multiplier, First Party DMA
- Supports RAID 0 (striping), RAID 1(mirroring) and RAID 0+1 (striping & mirroring) for performance and reliability
- Use as non-RAID controller for up to 4 individual
drives
- Supports SATA I and SATA II hard drives of any capacity
|
|
What's In the box:
|
- SATA PCI-X Controller Card
- CD with drivers and RAID Software
- Quick Installation Guide
|
|
2 External / 2 Internal Port SATA PCI-X Controller Specifications
|
- 2 eSATA and 2 internal 7-pin SATA ports
- PCI-X Bus: 64-bit, 133 MHz
- Supports SATA data rates up to 3Gb/sec (300 MB/s)
- FIFO: 256 Bytes per channel
- Supports first-party DMA commands for Native Command Queuing
- Supports SATA Port Multipliers
- Supports SATA I and SATA II hard drives of any capacity
- Integrated PCI DMA engines
- Supports Spread Spectrum Receiver
- Supports RAID 0, RAID 1, RAID 1+0, RAID 5
- Works as a non-RAID controller to add up to 4 individual drives
- Supports Hot Swapping of drives
|
|
Minimum System Requirements
|
|
|
NEW!