SATA RAID card, 4-port. Supports: Striping (RAID 0),
Mirroring (RAID 1), or both (RAID 0+1). Or use as a non-RAID controller for up to 4 individual drives.
System Requirements
|
|
SATA
RAID Controller |
|
Retail Value: $89.00
|
|
Your cost, ONLY:
|
|
$36.87
|
|
|
|
|
SATA RAID Controller, 4 Port PCI Card
|
- Provides 4 high speed internal SATA RAID ports
on one PCI card
- Use as non-RAID controller to add up to 4
individual drives
- Easily connect four Serial ATA/150 hard drives in
one computer
- Features data transfer rates of up to 150 MBytes/sec
|
|
Make the jump to Serial ATA performance with this four-port
SATA RAID Controller card. Whether you need Striping, Mirroring, or both, this card has your needs covered.
It supports up to 4 Serial ATA hard drives and can be configured as RAID 1, RAID
0 or RAID 1+0. Also functions as a non-RAID controller for up to 4 individual drives.
The SATA RAID card includes an interchangeable bracket, letting it fit in
both Low Profile and
standard card height computer configurations!
|
|
What's In the box:
|
- 4 Port SATA RAID PCI card
- Interchangeable bracket
|
|
SATA RAID Controller Specifications
|
- 4 internal 7-pin SATA ports
- Data Transfer Rate: Up to 150 Mbytes/sec
- FIFO: 256 Bytes per channel
- Supports first-party DMA commands for Native Command Queuing
- Supports large hard drives of 137 GB or greater
- Integrated PCI DMA engines
- Supports Spread Spectrum Receiver
- Built-in RAID 0, RAID 1 and RAID 1+0 support
- Works as a non-RAID controller to add up to 4 individual drives
- Supports Hot Swapping of drives
- Fits standard Desktop cases and low profile systems
- Standards: Serial ATA 1.0 standard
- PCI Bus: 32-bit, 33/66 MHz
- Warranty: Lifetime
|
|
System Requirements
|
- Pentium II 400 MHz or faster desktop computer with available PCI slot
- Windows 98SE, Windows ME, Windows 2000 or Windows XP
|
|
|
NEW!
